SHOW Hydrogen's special relationship with Carbon

CLICK ON PHOTO
TO ENLARGE

1. Extend clean tape
beyond top of C box





2. Hold loop's curve, position,
press tape











3. Tape two layers together behind N

1. Stand the assembly up and apply a tape square to the center/outside/top edge of the Carbon box, half protruding above - sticky side to the inside.

2. Bring a relaxed H strip from the right of the H attachment to be flush with the C box top and press to sticky side of the extended tape just placed. Smooth to conceal. Apply another tape square inside, directly behind the first.

Bring the Hydrogen Crown extended H box that comes from over the He box together against where the C connection is, making flush the two strips looping to the right of C all the way to the rear of He, and apply another tape square from the inside bottom holding the inside Crown strip to the outside one.

3. Add a small piece of tape over the top edges of both strips to help them maintain their position over Carbon.

Assembly Completed!
Congratulations!

<<- Return to Choices Page

Any problems? Call the AAE HELPLINE at 773.271.0318 days
...or email me at Roy@AlexanderArrangementofElements.com.


< BACK